VAG Comista
Valvoja: ffp jäsenet
VAG Comista
Ostin Elekmalta usb kaapelin ja asennus onnistui. Mikä versio pitää olla vag comista jotta saa audi a4 1996 nollattua huoltovalot tai mistä valikosta kyseinen toiminta löytyy
Vagcom versio 311 tai uudempi käy hyvin. Vagcomin version eka numero kertoo valmistusvuoden eli periaatteessa tuo 311 käy mihin vaan vaggineeseen joka on vanhempi kuin 2003. Vagcomin ja ohjeet voi hankkia tuolta: http://www.ross-tech.com/
-
- -
- Viestit: 3377
- Liittynyt: 23.7.2003 21:20
Mites, ei taida ilmainen demoniversio toimia tuossa Audin huoltoilmaisimen nollauksessa. Itsellä ainakin alkoi herjaamaan että tarvis ostaa täysi versio.
Vinkkejä otetaan vastaan (vink vink) ;-)
Täällä ohjeet miten se pitäisi onnistua jos versio tukee
Vinkkejä otetaan vastaan (vink vink) ;-)
Täällä ohjeet miten se pitäisi onnistua jos versio tukee
Nollaus ei tosiaan taida onnistua shareware-versiolla. http://www.ross-tech.com/Merchant2/merc ... ode=VAGCOM
nyt onnistu nollaus tuolla 311-2 versiolla.Hieno homma.Tuossa vielä ohjetta kehiin
.Pre-1998 models ... or if Channel 02 is not available:
[Select]
[17 - Instruments]
[Adaptation - 10]
Enter the correct channel from the list below in "Channel Number"
[Read]
The "Stored Value" is the current value for that channel.
Enter the "New" value of from the list below.
[Test]
[Save]
Channel 05 should be the distance until the next Oil Service.
It is in thousands of kilometers. Let's say you want the Oil
Service light to come on in 5000 miles. That would be 8000 km.
Put the value 8 into channel 05. The "standard value" used by the US
dealers would be 12 (7500 miles).
Channel 06 should be the distance until the next In-1 Service.
Same units as above. Standard value would be 24 (15,000 miles).
Channel 07 should be the time until the next In-1. In-1 lights
up based on time or distance, whichever comes first. This is in
10's of days. Standard value would be 36 for 360 days.
Channel 08 would be time until the next In-2. In-2 is based
strictly on time. Standard value is 72 for 720 days (about
two years).
.Pre-1998 models ... or if Channel 02 is not available:
[Select]
[17 - Instruments]
[Adaptation - 10]
Enter the correct channel from the list below in "Channel Number"
[Read]
The "Stored Value" is the current value for that channel.
Enter the "New" value of from the list below.
[Test]
[Save]
Channel 05 should be the distance until the next Oil Service.
It is in thousands of kilometers. Let's say you want the Oil
Service light to come on in 5000 miles. That would be 8000 km.
Put the value 8 into channel 05. The "standard value" used by the US
dealers would be 12 (7500 miles).
Channel 06 should be the distance until the next In-1 Service.
Same units as above. Standard value would be 24 (15,000 miles).
Channel 07 should be the time until the next In-1. In-1 lights
up based on time or distance, whichever comes first. This is in
10's of days. Standard value would be 36 for 360 days.
Channel 08 would be time until the next In-2. In-2 is based
strictly on time. Standard value is 72 for 720 days (about
two years).
Palaa sivulle “Yleinen - muut aiheet”
Paikallaolijat
Käyttäjiä lukemassa tätä aluetta: Ei rekisteröityneitä käyttäjiä ja 32 vierailijaa