Oil pressure gauge installation

Oil pressure gauge is always a good investment. There's only one thing worser for the engine than low oil pressure, and that's detonation. Anyways, there are two choices for oil pressure gauges, mechanical and electrical gauges. I suggest that you buy a good mechanical gauge.

The installation is easy, just mount T-crotch between the oil pressure sensor and the engine, then just install hose from the T-crotch to the gauge. Remember that the hose must handle oil and 15bar pressure!

Use LocTite in the threads. If you use Teflon Tape instead of LocTite (Like I did) be sure that the tape doesn't break off inside the connectors and get into the oil circulation.

Always use lead-in rubber when installing hoses through the firewall!

Mainosta ffp.fi sivustolla.
Ota yhteyttä